Chinamfg
Yeni Üye
Kayıt Tarihi: 2023-09-Kasim
Ülke: Azerbaycan
Aktif Durum: Pasif
Gönderilenler: 1
|
| Gönderen: 2023-09-Kasim Saat 16:23 | Kayıtlı IP
|
|
|
1. The speed of the laser welding machine has a great
influence on the power of the laser welding machine. The
speed of the welding machine is directly proportional to
the power of the laser welding machine. At the same time,
the quality of the welding machine is related to the
quality of the laser beam and the characteristics of the
laser beam focusing system, that is, the size of the
focused laser beam has a great impact on the laser
quality.
2. The distance between the nozzles and the distance
between the workpiece and the nozzles will also affect
the power of the laser welding machine. A distance that
is too long will cause unnecessary waste of kinetic
energy, and a distance that is too close will affect the
diffusion ability of the spatter welding machine. The
appropriate distance is 0.8mm. In addition, the laser
cutting material and welding machine mainly uses the
following adjustments to weld workpieces with uneven
surfaces, and the height of the nozzle and workpiece
should always be the same during operation.
3. The focus position will affect the accuracy of the
welding machine, especially the focus diameter. The focal
spot diameter should be as small as possible to create a
narrow slit. The focal spot diameter is proportional to
the focal depth of the focusing lens. The smaller the
focal depth, the smaller the focal spot diameter.
4. Auxiliary gas, auxiliary gas and gas pressure will
also affect the power of the cutting/acrylic">acrylic cut and laser
welder. If the material thickness increases or the
welding machine speed is slow, the gas pressure should be
appropriately reduced. Use a low pressure welder to
prevent frost on the edge welder.
Düzenleyen Chinamfg 2023-09-Kasim Saat 16:32
__________________
The Fastest China Rapid Prototype,Small To Large Batch Manufacturer to Bring Your Ideal Project to Life - Be-Cu
|
Aktif Konular 
Üye Listesi 
Arama 
Yardım
Kayıt Ol 
Giriş
Gitar-tr.com FORUM : En sonunda...
Konu: The positioning accuracy of CNC lathes is
